Carboxymethyl Cellulose-CMC

CMC is a low viscosity technical grade dispersible Carboxymethyl Cellulose fluid loss additive designed to reduce API filtration rate with minimum increase in viscosity in water based drilling fluids.
It is a cost effective additive used as a fluid loss reducer in fresh water and brackish water systems. It is used to control fluid loss in dispersed and non dispersed drilling fluids.
Widely available and low cost polymer for fluid Loss control.
It is an effective at providing filtration control in most water based drilling fluids.
It is effective in low concentrations.
It is Non–Toxic.
It is not subjected to bacterial fermentation and calcium contamination.
Can be sed Fluid systems.
Physical Properties:

 used in Most water ba Viscosity (Dial reading at 600rpm, Fann 35 viscometer) Filtrate Loss, ml
Property Type Distilled wate 4% Salt water  
CMC-LV 90 max. / / 10 max.
CMC-HV 30 min. 30 min. 30 min. 10 max.

Material is packed in 25kg or 50 Lbs (22.7 Kg) sacks. Private Labeling and customized packaging is also available on request
Safety And Handling:
Material must be handled as a Industrial chemical, wearing protective equipment and observing the precautions as mentioned in the MSDS.